Bosch Rexroth IndraDrive Fc 1.5kW 400V 3ph - AC Inverter Drive Speed Controller

FCS01.1E-W0008-A-04-NNBV (R911311064)

Order Code: 19972


1 in Stock - order by 3pm for next working day delivery*

2+ normally 2000 weeks

Condition: New from Manufacturer with Warranty
Brand: Bosch Rexroth
Range: IndraDrive Fc

Bosch Rexroth IndraDrive Fc AC Frequency Inverter for 1.5kW (2.0HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 4.0A. Simple to set-up with 400V three phase input for a standard AC Induction motor.

No Keypad included - see linked products below for keypad options.

Size B: 73mm Wide x 153mm Deep x 226mm high (260mm high when included wall mounting brackets are fitted) IP20.
Weight: 1.8kg (approx).

Overload - 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range - 0-400Hz.
Braking - To 180 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.

Features - 2 x Analogue/Digital Inputs, 5 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets, RS232, RS485.
DC Bus terminals for Common Bus energy saving applications.
Programmable from a PC via 'IndraWorks' software and PC Cable - see linked products below.

Input Current - 5.6.
Input Voltage - 380-480V Three Phase -20% +10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 55011 Class A 2nd Environment (Industrial)

Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - [not specified].
Mounting via 2 x detachable heatsink-mounted brackets at rear (top and bottom). 1 x 5.5mm diameter hole per bracket.

Full part number is FCS01.1E-W0008-A-04-NNBV or R911311064.

Download the IndraDrive Fc Manual from the link below:-