Bosch Rexroth EFC5610 18.5kW 400V 3ph AC Inverter Drive, HMI, DBr, STO, C3 EMC

EFC5610-18K5-3P4-MDA-7P-NNNNN-L1NN (R912005749)

Order Code: 30598

List Price: £1,365.80

Delivery normally 3 weeks

Condition: New from Manufacturer with Warranty
Brand: Bosch Rexroth
Range: EFC5610

Bosch Rexroth EFC 5610 Series AC Inverter for 18.5kW (25HP) 400V 3 Ph motor to 39.2A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.

Size G: 165mm Wide x 241mm Deep x 313mm High. IP20.
Weight: 8kg.

Overload: 150% x 60 seconds
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 28 Ohm, maximum 30 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.

Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.

STO Included. SIL3, Cat 4.

Input Current: 45.8A.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).

Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 530W.
Mounting via 4 x 6.5mm diameter holes at rear on 140mm x 300mm centres.

Manufacturer part number is EFC5610-18K5-3P4-MDA-7P-NNNNN-L1NN.
Replaces the IndraDrive Fc where the application permits.

Download the Bosch Rexroth EFC 5610 Manual from the link below:-