Bosch Rexroth EFC 5610 Series AC Inverter for 11kW (15HP) 400V 3 Ph motor to 24.3A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Dimensions: Size F 150mm Wide x 233mm Deep x 283mm High.
Enclosure Rating: IP20.
Overload: 150% x 60 seconds.
Speed Control Range: 0-400Hz.
Dynamic Braking (DBr): 100% duty to minimum 47 Ohm, maximum 50 Ohm external resistor (not supplied), see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 28A.
Input Voltage: 380V-480V Three Phase +10% -15% at 50-60Hz ±5%.
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Mounting: Cubicle mount via 4 x 6.5mm diameter holes at rear on 125mm x 265mm centres.
Ambient: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 320W at maximum output.
Part Number: EFC5610-11K0-3P4-MDA-7P-NNNNN-NNNN, or R912005101.
Replaces the IndraDrive Fc where the application permits.
Download the Bosch Rexroth EFC 5610 Manual from the link below:-