Bosch Rexroth EFC 3610 Series AC Inverter for 3kW (4HP) 400V 3 Ph motor to 7.4A at High Overload or when Fan/Pump rated. Operates in standard VxF and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Dimensions: Size D 120mm Wide x 175mm Deep x 231mm High.
Enclosure Rating: IP20.
Overload: 150% x 60 seconds.
Speed Control Range: 0-400Hz.
Braking: 100% duty to minimum 140 Ohm, maximum 200 Ohm external resistor (not supplied), see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 9.1A at High Overload or when Fan/Pump rated.
Input Voltage: 380V-480V Three Phase +10% -15% at 50-60Hz ±5%.
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if required.
Mounting: Cubicle mount via 35mm DIN rail, or 4 x 4.5mm diameter holes at rear on 80mm x 221mm centres.
Ambient Temperature: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 135W at maximum output.
Part Number: EFC3610-3K00-3P4-MDA-7P-NNNNN-NNNN, or R912005721.
Replaces an EFC3600 of equivalent rating or IndraDrive Fc where the application permits.
Download the Bosch Rexroth EFC 3610 Manual from the link below:-