Bosch Rexroth EFC 3610 Series AC Inverter for 1.5kW (2HP) 400V 3 Ph motor to 4A at High Overload or when Fan/Pump rated. Operates in standard VxF and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size C: 95mm Wide x 170mm Deep x 206mm High. IP20.
Overload: 150% x 60 seconds
Speed Control Range: 0-400Hz
Braking: 100% duty to minimum 350 Ohm, maximum 400 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 4.8A at High Overload or when Fan/Pump rated.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if required.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 75W.
Mounting via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 66mm x 196mm centres.
Manufacturer part number is EFC3610-1K50-3P4-MDA-7P-NNNNN-NNNN or R912005719.
Replaces an EFC3600 of equivalent rating or IndraDrive Fc where the application permits.
Download the Bosch Rexroth EFC 3610 Manual from the link below:-