Bosch Rexroth EFC 3610 Series AC Inverter for 11kW (15HP) 400V 3 Ph motor to 24.3A at High Overload or 15kW (20HP) to 32.4A when Fan/Pump rated. Operates in standard VxF and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size F: 150mm Wide x 233mm Deep x 283mm High. IP20.
Overload: 150% x 60 seconds (High Overload)
Overload: 120% x 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking: 100% duty to minimum 47 Ohm, maximum 50 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 28A at High Overload, 37.8A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if required.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 462W.
Mounting via 4 x 6.5mm diameter holes at rear on 125mm x 265mm centres.
Manufacturer part number is EFC3610-11K0-3P4-MDA-7P-NNNNN-NNNN or R912005093.
Replaces an EFC3600 of equivalent rating or IndraDrive Fc where the application permits.
Download the Bosch Rexroth EFC 3610 Manual from the link below:-