Bosch Rexroth EFC3610 0.75kW 230V 1ph to 3ph AC Inverter Drive, HMI, DBr, C3 EMC

EFC3610-0K75-1P2-MDA-7P-NNNNN-NNNN (R912005714)

Order Code: 27383

List Price: £220.41
£110.21
1+

3 in Stock - order by 3pm for next working day delivery*

4+ normally 4 weeks

Condition: New from Manufacturer with Warranty
Brand: Bosch Rexroth
Range: EFC3610

Bosch Rexroth EFC 3610 Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor to 3.4A at High Overload or when Fan/Pump rated. Operates in standard VxF and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.

Size B: 95mm Wide x 167mm Deep x 166mm High. IP20.
Weight: 1.5kg.

Overload: 150% x 60 seconds
Speed Control Range: 0-400Hz
Braking: 100% duty to minimum 190 Ohm, maximum 200 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.

Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 10.1A at High Overload or when Fan/Pump rated.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if required.

Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 70W.
Mounting via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 66mm x 156mm centres.

Manufacturer part number is EFC3610-0K75-1P2-MDA-7P-NNNNN-NNNN or R912005714.
Replaces an EFC3600 of equivalent rating or IndraDrive Fc where the application permits.

Download the Bosch Rexroth EFC 3610 Manual from the link below:-